Tag Archives: gearbox for pto

Best made in China – replacement parts – manufacturer in China XCMG pto step up gearbox Cancun Mexico Engineering Construction Machinery Equipment 25 Ton China Small Mobile Truck Crane Qy25K-II Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China XCMG   pto step up gearbox   Cancun Mexico   Engineering Construction Machinery Equipment 25 Ton China Small Mobile Truck Crane Qy25K-II Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

We EPG is one of the biggest producers in China. We have innovative devices for generation and new ept tests capacity . Via adopting new ept from British, German, U.S.A, our products are best sellers all in excess of European, The usa, and Southeast Asia.- EPG Team the largest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

XCMG engineering ept machinery tools twenty five ton China Tiny Cell Truck Crane Qy25K-II cost

Major parameters:
Max. rated total lifting potential: 25T

Totally prolonged increase:34.2M
Entirely prolonged increase+jib:42.3M

Primary configuration:
* WeiChai (WD615.329) /ShangChai (SC8DK280Q3) engine 206 – 213 KW
* Wire rope
* Hirschmann PAT
*Heater

XCMG QY25K-II is the most common product of China 25t truck crane, is ept crystallization which our organization applies for numerous years producing expertise,bases on the mature engineering.Using total cover to just take the system making use of large raise equilibrium weight, significantly strengthening the ease of use of the productclassic K series visual appeal total hydraulic push, straightforward to work, adaptable.

Dimension Device QY25K-II
Overall length mm 12650
Total width mm 2500
Total height mm 3380
Bodyweight
Whole fat in vacation kg 29400
Entrance axle load kg 6200
Rear axle load kg 23200
Power
Engine product   SC8DK280Q3 / WD615.329(domestic III)
Engine rated electricity kW/(r/min) 206/2200   213/2200
Engine rated torque N.m/(r/min) 1112/1400  1160/1400
Travel
Max. vacation speed km/h 75
Min. turning diameter m 21.5
Min. ground clearance mm 275
Method angle ° sixteen
Departure angle ° thirteen
Max. quality capacity % 30
Gasoline usage for 100km L ≈37
Principal efficiency
Max. rated whole lifting capability t 25
Min. rated wor ept radius mm 3000
Turning radius at turntable tail m 3.065
Max. lifting torque kN.m 1571
Base increase m 10.7
Totally extended growth m 34.19
Entirely prolonged increase+jib m 42.fifteen
Longitudinal outrigger span m five.14
Latera pto gearbox 540 to 3600 Bogra Bangladesh l outrigger span m six
Wor ept speed
Growth luffing time s seventy five
Growth complete extension time s one hundred
Max. swing pace r/min ≥2.five
Max. speed of major winch (one rope) m/min ≥120
Max. velocity of aux. winch (single rope) m/min ≥120

Business profile
XCMG is a  ept equipment manufacturer with more than 70 many years of experience. Above the many years, we have developed to become the world’s most complete ept machinery producer and influential multinational firm. In 2019, we rank No.1 in China and No. 5 in worldwide weighty products sector.XCMG’s ept equipment covers an astonishing range of products, such as cranes, earth-moving  machinery, street equipment, excavators, concrete machinery, ept equipment, piling equipment, lumber machinery, fire-fighting equipment, large vans, sanitation machinery, agricultural machinery, and far more. We have the world’s most complete product line, and supply customers total answers for ept gear.  Our other organizations contain finance, leasing, and remanufacturing.

At existing, the electricity of my firm’s straight-arm crane is completely from the hydraulic oil pressure, that is, via the large-pressure hydraulic oil to promote the cylinder piston reciprocating movement, or travel the hydraulic motor rotation tends to make the hydraulic winch and rotary mechanism rotation.
 
So, how do substantial-pressure hydraulic oil get? Every truck crane is geared up with a hydraulic pump when the car chassis is matched, and the motor supplies energy for it. The chemical energy of the gasoline can be converted into the crankshaft of the engine to rotate the mechanical energy, and then the gearbox equipment is rotated, and then the electrical power is transmitted to the hydraulic pump through the power transmission of the gearbox. Consequently, the hydraulic pump can continually pressurize the hydraulic oil For the large-force hydraulic oil, so as to offer electricity for the crane to achieve the lifting of the products.
 
Aggressive Edge
My company’s straight arm crane crane covers 1-twenty five tons fourteen types sixty five varieties of goods, to meet a variety of circumstances, with the longest arm of the biggest tonnage crane mature manufacturing technologies, scientific research and growth approach, superior Research and improvement technologies, and consistently have new merchandise to industry, to fulfill consumer use.
My company’s boom arm segment with experienced pentagonal, hexagonal and octagonal, the latest technology of merchandise with U-shaped arc arm human body weight reduction, arm width of a large deflection, stability and resistance to deformation Capability to boost, considerably increase the lifting potential.
The application of the sub-arm, sub-winch and vice-hook supplies a basis for the rapid and large-scale operation of the crane gentle load and the large-altitude operation. The software of automatic hook ept saves time and work when starting up and ending crane operations, ma ept it easy to operate simply.
Our company will offer you the high quality products with a low price, quick delivery,and professional after-sale service.

 

The use of authentic gear manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our company and the shown substitute components contained herein are not sponsored, accepted, or made by the OEM.

Best  made in China - replacement parts - manufacturer in China XCMG   pto step up gearbox   Cancun Mexico   Engineering Construction Machinery Equipment 25 Ton China Small Mobile Truck Crane Qy25K-II Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China XCMG   pto step up gearbox   Cancun Mexico   Engineering Construction Machinery Equipment 25 Ton China Small Mobile Truck Crane Qy25K-II Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China XCMG   pto step up gearbox   Cancun Mexico   Engineering Construction Machinery Equipment 25 Ton China Small Mobile Truck Crane Qy25K-II Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China XCMG   pto step up gearbox   Cancun Mexico   Engineering Construction Machinery Equipment 25 Ton China Small Mobile Truck Crane Qy25K-II Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best made in China – replacement parts – manufacturer in China Hot 608c corn head gearbox Chiang Rai Thailand Sale New Rice Wheat Combine Harvester with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Hot   608c corn head gearbox   Chiang Rai Thailand   Sale New Rice Wheat Combine Harvester with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

We HangZhou EPG Co.,Ltd. , was established in November, 1997. With its five wholly owned subsidiaries.- EPG Team the largest agricultural gearbox and pto manufacturing unit in China with 5 different branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-1308 john deere 49 snowblower gearbox Munich Germany 3988828

Merge Harvester 4LZ-4.6 Rice Wheat, Soybean, Corn

1. Adopts  100hp Motor for larger perform performance, specifically for wor ept in deep mud subject.
2. Uses Gear box  Imported HST for wor ept a lot more efficiently.
3. Min ground clearance 38cm and rubber keep track of 500*90*51 ensure equipment work more quickly in deep mud area.
four. All path grain discharging pipe can carry much more comfort.

 

The use of unique equipment manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our company and the outlined replacement areas contained herein are not sponsored, accredited, or created by the OEM.

Best  made in China - replacement parts - manufacturer in China Hot   608c corn head gearbox   Chiang Rai Thailand   Sale New Rice Wheat Combine Harvester with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Hot   608c corn head gearbox   Chiang Rai Thailand   Sale New Rice Wheat Combine Harvester with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Hot   608c corn head gearbox   Chiang Rai Thailand   Sale New Rice Wheat Combine Harvester with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Hot   608c corn head gearbox   Chiang Rai Thailand   Sale New Rice Wheat Combine Harvester with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best made in China – replacement parts – manufacturer in China Pto power take off gearbox Amritsar India Gearbox Ml52 Male Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Pto   power take off gearbox   Amritsar India   Gearbox Ml52 Male Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

We focus in energy transmission merchandise Chain,pto shaft, agricultural gearboxes , CATV merchandise, mechanical seal, hydraulic and Pheumatic, and advertising items.- EPG Team the biggest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

PTO gearbox equal brevini ML52 male shaft

The  Gearboxes are made for connecting gear pumps to farm tractor power consider offs (PTO).Output speed of electricity get offs is 540rpm which can be when compared with the correct operating speeds of hydraulic pumps.Distinct input managing speeds can also be suited,offered that the PTO gearbox output speed does not exceed 3000 rpm.

Gears
Manufactured in Metal UNI 18 PCR M03.Stub tooth guarantee extremely higher resistance and operate really quietly.

Shafts
Created in metal UNI sixteen CRN4.They are coupled with splined gears and are made to stand the torque values mentioned in the catalogue.

Lubrication
SAE 90 equipment oil should be set in the pto gearbox prior to use, alter the oil right after the very first sixty-80 hours and then every twelve months or 1500 several hours which ever falls first.

Maintenance
Please check out the oil stage through the particular oil window each fifty several hours.Wor ept temperatures should not exceed 120 degrees celcius below continuos duty cycle.

Packaging & Shipping

Plastic bag pac ept for a single piece / two items in a single exporting carton / 100 cartons set on a pallet

FAQ

 

one.Q:Is your organization a  ept business or a manufacturer?

A:Our organization is a  ept organization also a manufacturer, we have our very own factory to generate gearbox, pump help..Etc

Also we distribute equipment pumps, tractor machinery,dump truck pump  from chosen premium suppliers to meet customers’ variable desire.

 

two.Q:What about the good quality handle and guarantee ?

A:”Top quality first, Buyers foremost”.Each and every piece of goods is cheeked and tested strictly one by 1 prior to pac ept and shipping and delivery.

Our goods have one calendar year warranty, complex support is limitless from us.

 

3.Q:Can you supply samples for chec ept and screening?

A:Indeed,we provide cost-free samples for chec ept the develop high quality and real efficiency of our merchandise,the freight require to be coverd by buyer.

 

4.Q:How can I get to your firm?

A:Our company handle is No.888 Huaxu Highway,Xihu (West Lake) Dis. district,ZheJiang ,China

It is about thirty minutes by auto from ZheJiang Xihu (West Lake) Dis.ao airport or ZheJiang Xihu (West Lake) Dis.ao Railway station.

The use of authentic products manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the shown alternative areas contained herein are not sponsored, accepted, or created by the OEM.

Best  made in China - replacement parts - manufacturer in China Pto   power take off gearbox   Amritsar India   Gearbox Ml52 Male Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Pto   power take off gearbox   Amritsar India   Gearbox Ml52 Male Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Pto   power take off gearbox   Amritsar India   Gearbox Ml52 Male Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best  made in China - replacement parts - manufacturer in China Pto   power take off gearbox   Amritsar India   Gearbox Ml52 Male Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Worm made in China – replacement parts – tractor pto gearbox Athens Greece Gear Operators for Valve with ce certificate top quality low price

Worm  made in China - replacement parts -   tractor pto gearbox   Athens Greece   Gear Operators for Valve with ce certificate top quality low price

We It has recognized steady cooperation with a lot of ept acknowledged universities and institutes in china this kind of as, ZHangZhoug University, HangZhou University, Technological committee of national chain generate common, Institute of nationwide chain push, ZHangZhoug software engineering material institute, Huhan material protection institute and it cooperated to found China 1st Automobile chain institute with Countrywide chain drive institute.- EPG Team the largest agricultural gearbox and pto factory in China with 5 various branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

                     KB-S Sequence WORM Gear BOX

ERIES WORM Gear BOX

                                                                         Attribute

  1. The gear box can be employed to butterfly valve, ball valve, plug valve and so on
  2. Castings with precision casting, novel fashion, good look
  3. Design and style Standard acc to ISO5211, with reasonable construction
  4. Adopting worm gear and worm travel, worm equipment with self-locking by making use of tapered roller bearings ,helps make transmission more flexible and with high performance
  5. Can be with stem bush,which will be a lot more convinent
  6. 1 much more reducer is utilised on the gear box, can run more easily even though the ratio is greater.
  7. Security class can be IP65
  8. Travelling: ~ ninety degree (+-5 degree adjustable)
  9. Clockwise rotation of handwheel to shut valve and counterclockwise rotation to open valve
  10. Handwheel dimension can be tailored according                        to requirement                                                                                                               

                                                                          Areas and Materials Listing
 

NO. Description Substance Substance variety
1 Bolts Carbon Steel ASTM A29M-1571
two Indicator Plate Carbon Metal ASTM A29M-1571
three O-ring Rubber NBR
four Oil seal Rubber NBR
5 Handwheel indicator Carbon Metal ASTM A29M-1571
6 Bolts Carbon Metal ASTM A29M-1045
seven Cover Carbon Steel/ Ductile iron ASTM A216 WCB/ ASTM A536 65-forty five-twelve
8 Sealing Gasket Insulation paper  
nine Worm Gear Ductile iron ASTM A536 sixty five-forty five-twelve
10 Stem Bush Carbon Steel ASTM A29M-1571
eleven Snap Ring Carbon Metal ASTM A29-1566
12 Conclude Cover Carbon Metal ASTM A29M-1571
13 Bearing Alloy Metal ASTM A295-52100
14 Entire body Carbon Steel/ Ductile iron ASTM A216 WCB/ ASTM A536 65-45-twelve
15 Grease Nipple Carbon Steel ASTM A29M-1571
16 Worm Carbon Metal ASTM A29M-1045
seventeen Important Carbon Steel ASTM A29M-1045
eighteen Reduction body Carbon Steel/ Ductile iron ASTM A216 WCB/ ASTM A536 65-45-12
19 Bolts Carbon Metal ASTM A29M-1045
twenty Bearing Alloy Steel ASTM A295-52100
21 Gears Carbon Steel ASTM A29M-1045
22 Snap Ring Carbon Steel ASTM A29-1566
23 Reduction go over Carbon Steel/ Ductile iron ASTM A216 WCB/ ASTM A536 sixty five-forty five-12
24 Washer of nuts Carbon Steel ASTM A29M-1571
twenty five Changing nuts Carbon Metal ASTM A29M-1045
26 Adjusting Bolts Carbon Metal ASTM A29M-1045

Dimension

DIM
 
Design
Mounting Base External Component Input Shaft Part Handwheel
Type Flange Dimensions D1 P.C.D D3 H0 H1 H2 K K1 K2 K3 L L2 L1 PD KEY M
D2 N-H-DP
KB–1S  
A
F-12 85 a hundred twenty five four-M12-18 150 three 66 204 91 48 fifty one 220 eighty three 161 31 21 six three hundred
KB-01-1S F-14 100 one hundred forty 4-M16-24 a hundred seventy five four 75 225 94 forty eight sixty one 276 93 171 31 21 6 350
KB-02-1S F-16 130 a hundred sixty five four-M20-30 210 five 92 286 110 64 68 350 113 205 forty 28 eight 450
KB-03-1S  
 
B
(F-twenty) one hundred forty 205 8-M16-24 250 5 111 325 112 fifty eight sixty eight 362 126 217 forty 28 8 five hundred
KB-04-1S F-twenty five 200 254 eight-M16-24 three hundred five 144 383 124 sixty three 100 426 158 246 40 28 8 600
KB-05-1S F-thirty 230 298 eight-M20-30 350 five 160 453 143 seventy one a hundred and one 464 one hundred ninety 284 forty 28 8 650
KB-06-1S F-35 260 356 eight-M30-forty five 415 five two hundred 525 169 91 119 498 224 318 40 28 eight seven hundred
KB-07-1S B F-40 300 406 8-M36-fifty four 475 eight 225 619 one hundred ninety one hundred and one 155 457 237 417 60 38 10 800
KB-08-1S F-forty 300 406 eight-M36-fifty 475 eight 270 668 201 102 one hundred fifty five 499 279 459 60 38 10 900
KB-09-1S C F-48 370 483 12-M36-fifty four 560 8 338 790 232 116 561 341 521 60 38 10 900

Specialized Parameters

PARA
 
Design
 
Ratio
Flange Measurement (ISO5211) Max Valve Stem dmax Max Torque M.A. Weight
Input Output
mm Nm Nm ten% Kg
KB–1S sixty three:1 F-12 40 (12 X 8) 65 a thousand 16.1 19
KB-01-1S seventy four:1 F-14 50 (14 X 9) a hundred 1850 eighteen.9 21
KB-02-1S 129:one F-sixteen sixty (eighteen X eleven) ninety 3000 33 38
KB-03-1S 158:1 ( F-20 ) 70 (twenty X 12) 105 4200 forty 41
KB-04-1S 179:1 F-twenty five 90 (twenty five X fourteen) one hundred sixty 6500 41 sixty four
KB-05-1S 177:1 F-thirty one zero five (28 X sixteen) 225 10000 forty five ninety one
KB-06-1S 201:1 F-35 one hundred twenty (32 X 18) 295 15000 fifty one 137
KB-07-1S 202:one F-40 140 (36 X 20) 590 28000 forty eight 220
KB-08-1S 244:1 F-forty 165 (40 X 22) 890 48000 54 290
KB-09-1S 234:1 F-48 190 (45 X twenty five) 1300 72000 56 450

Remark:
enter torque=output torque/M.A.

About worm reducer
A worm gear reducer is a variety of reduction equipment that is employed to change high motor pace enter into reduce pace output even though also sustaining high torque. The worm producer is composed of a gear in the kind of a screw meshed into the device which outputs in the appropriate angle orientation. The worm reducer is mostly produced of bronze with steel or stainless metal worm. The dimensions of the worm reducer is quite tiny and smooth compared to other gear reducers which can make it extremely handy for rated motor velocity and room problems.

 Employs of Worm Reducer?

The worm reducers are used in fields like tuning devices, elevators, escalators, conveyor belts, healthcare tools, electricity transmission methods, and security gates to identify a handful of.

NMRV Worm Velocity Equipment Reducer
NRV Worm Velocity Equipment Reducer
Stainless Metal Worm Reducer
Lower Backlash Worm Reducer and Zero Backlash Servo Gearbox
Worm Equipment Box For Photo voltaic Trac ept Technique
Worm Reducer For Dried Powder Press
Worm Equipment Reducers For Hoists
Worm Equipment Reducers For Winch
STAINLESS Metal WORM REDUCERS
Servo Worm Gearboxes

Worm Reducer For Paper Reducing Machine
Worm Reducer For Steady Casting Device Of Foundry
Forged Iron Worm Reducers
Stainless Steel Worm Speed Reducer
Worm Equipment Reducers For Computerized Vehicle Washing Machines Drive
Worm Gearbox Reducers For The Biomass Boiler Sector

Worm Equipment Push Screw Actuator
Worm Reducer For ept Hoist
Worm Reducer For Rubber Tire Curing Press
Worm Reducer For Pipe Welding Machine

Worm Gear Slew Push
Arc Equipment Cylindrical Worm Gearbox
Motor Worm Gearboxes Gw10 With Chain Coupling For Greenhouse
Motor Worm Gearboxes Gw150s Chain Coupling For Screening Systems

 

 

Relevant Merchandise
     
Our Business
Ever-power Team professional in ma ept all types of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical equipment velocity reducers, parallel shaft helical equipment reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, vehicle gearboxes, pto shafts, unique reducer & associated equipment parts and other related products, sprockets, hydraulic program, vacuum pumps, fluid coupling, gear racks, chains, timing pulleys, udl velocity variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars minimal backlash worm reducers and so on. additionally, we can produce personalized variators, geared motors, electric motors and other hydraulic goods in accordance to customers’ drawings.
We provides a dependable grantee for the product’ s high quality by superior inspection and testing products. skilled technical crew, exquisite processing ept and rigorous management system. 
In recent years, the firm has been building quickly by its abundant expertise in creation, innovative administration method, standardized administration program, sturdy technological force. We always adhere the notion of survival by good quality, and advancement by innovation in science and technology. 
Our Group is prepared to function with you hand in hand and create brilliance jointly! 

Materials offered

Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be tailored with regards to client needs.

Surface treatment method

Blacking, galvanization, chroming, electrophoresis, coloration painting, …

 

Warmth treatment method

High frequency quenching warmth treatment method, hardened enamel, carbonizing, nitride, …
 

Certifications

FAQ:
 

Q: Are you ept business or maker ?

A: Our group is made up in 3 factories and 2 overseas sales firms.

Q: Do you provide samples ? is it totally free or further ?
A: Indeed, we could supply the sample for totally free cost but do not shell out the price of freight.

Q: How extended is your delivery time ? What is your conditions of payment ?
A: Typically it is 40-forty five times. The time may range relying on the product and the stage of customization. For common items, the payment is: thirty% T/T in advance ,stability just before shippment.

Q: What is the actual MOQ or price tag for your merchandise ?
A: As an OEM company, we can provide and adapt our goods to a broad range of requirements.Therefore, MOQ and price tag may possibly significantly fluctuate with size, content and more technical specs For instance, high priced items or normal products will generally have a reduce MOQ. Remember to speak to us with all related information to get the most exact quotation.

If you have another question, make sure you truly feel free of charge to make contact with us.

Pac ept & Shipping
Companies
Also I would like to take this prospect to give a short introduction of our Ever-Energy company:

Our firm is a renowned manufacturer of agriculture gearbox,worm decrease gearbox, PTO shafts, Sprockets ,rollar chains, bevel equipment, pulleys and racks in china.

We have exported many goods to our buyers all in excess of the world, we have long-time encounter and robust ept assistance. 

Some of our client :
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA electrical power tiller gear oil Pyongyang Dem. People’s Republic of Korea , Brevini
Germany: SILO ept ,GKN ,KTS
France: Itfran, Sedies
Brazil: AEMCO ,STU 
United states of america: John Deere , BLOUNT, Weasler, Agco, Omni Equipment, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……

-Ø Our Firm with over twelve year’s historical past and a thousand employees and twenty sales.
-Ø With above a hundred Million USD income in 2017
-Ø With advance machinery equipments
-Ø With huge operate potential and high good quality manage, ISO licensed.
……

You also can check our site to know for more particulars, if you require our merchandise catalogue, remember to speak to with us.

 

 

 

 

The use of first products manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our business and the shown substitution areas contained herein are not sponsored, accepted, or made by the OEM.

Worm  made in China - replacement parts -   tractor pto gearbox   Athens Greece   Gear Operators for Valve with ce certificate top quality low price

Worm  made in China - replacement parts -   tractor pto gearbox   Athens Greece   Gear Operators for Valve with ce certificate top quality low price

Worm  made in China - replacement parts -   tractor pto gearbox   Athens Greece   Gear Operators for Valve with ce certificate top quality low price

Worm  made in China - replacement parts -   tractor pto gearbox   Athens Greece   Gear Operators for Valve with ce certificate top quality low price

68 made in China – replacement parts – 540 pto gearbox 90 degree Grande Sao Luis Brazil Series Deep Grove Ball Bearing for Precision Instruments, Gearbox, Motors, Household Appliances with ce certificate top quality low price

68  made in China - replacement parts -   540 pto gearbox 90 degree   Grande Sao Luis Brazil   Series Deep Grove Ball Bearing for Precision Instruments, Gearbox, Motors, Household Appliances with ce certificate top quality low price

We we supply chromed bar and tubes for hydualic and pheumatic cylinders, pto shaft, agricultural gearboxes etc. – EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us bareco slasher gearbox Kaduna Nigeria at: 0086-13083988828

Product Description
68 Series Deep Grove Ball Bearing can be used for skateboard, skate shoes, bicycle, precision instruments,gearbox, motors, household appliances, internal combustion engines, transport vehicles, agricultural machinery, ept machinery, ept machinery, yo-yo food machinery, stainless steel bearing, made of stainless steel (9Cr18), corrosion resistance, food grade grease, for food machinery such as juicer, Coffee Machine and so on.

Features:
Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball.
The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operation at very high speed or for large diameter bearings.

Deep Groove ball bearings with seals or shields are standardized. They contain proper amount of grease in advance.
1,deep groove ball bearings types:1, single row deep groove ball bearings
2, single row deep groove ball bearings with dust cover
3, with a dust cover, a ring of single row deep groove ball bearings
4, the outer ring on the stopper groove and snap ring of single row deep groove ball bearings
5, deep groove ball bearings ball gap
6, double row deep groove ball bearings

Wor ept Principle:
Ball bearings are made of a variety of material types, including ceramic and metal. Ceramic ball bearings are generally recognized as superior because they can dissipate the heat and friction generated inside a ball bearing more easily than a normal metal ball bearing can. For purposes of normal usage however, a 608 ball bearing typically consists of chrome steel balls, both for durability and economic reasons, as a ceramic ball bearing can be quite expensive. Keeping your bearing clean and lubricated will make it work better and last much longer.  
Advantages:
1.Low friction, almost noiseless and high rolling speed 
2.Easy to install 
3.Simple structure ensures fast equipment
4.Optimised internal design
5.High load ratings 
6. Bearings with high quality and competitive price .
7. High speed, Less friction, low noise.
8. Full sizes to choose.
9. Delivery on time.
10. OEM is available.

Products show:

Data sheet:


Packings & Shipping

FAQ

 
 
 
 

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

68  made in China - replacement parts -   540 pto gearbox 90 degree   Grande Sao Luis Brazil   Series Deep Grove Ball Bearing for Precision Instruments, Gearbox, Motors, Household Appliances with ce certificate top quality low price

68  made in China - replacement parts -   540 pto gearbox 90 degree   Grande Sao Luis Brazil   Series Deep Grove Ball Bearing for Precision Instruments, Gearbox, Motors, Household Appliances with ce certificate top quality low price

68  made in China - replacement parts -   540 pto gearbox 90 degree   Grande Sao Luis Brazil   Series Deep Grove Ball Bearing for Precision Instruments, Gearbox, Motors, Household Appliances with ce certificate top quality low price

68  made in China - replacement parts -   540 pto gearbox 90 degree   Grande Sao Luis Brazil   Series Deep Grove Ball Bearing for Precision Instruments, Gearbox, Motors, Household Appliances with ce certificate top quality low price

Anon made in China – replacement parts – pto reverser gearbox for sale Buraydah Saudi Arabia China ATV Front Mounted Flail Mower with ce certificate top quality low price

Anon  made in China - replacement parts -   pto reverser gearbox for sale   Buraydah Saudi Arabia   China ATV Front Mounted Flail Mower with ce certificate top quality low price

We It has established stable cooperation with many ept known universities and institutes in china such as, ZHangZhoug University, HangZhou University, Technical committee of national chain drive standard, Institute of national chain drive, ZHangZhoug application engineering material institute, Huhan material protection institute; and it cooperated to found China First Car chain institute with National chain drive institute.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

ANON atv front mounted flail mower suitable for towing behind any vehicle, is the perfect machine for paddock and field maintenance. The perfect tool for the tackling heavy weed removal & general paddock mowing & maintenance on farms, small holdings.Below are the main features:

1. ANON atv front mounted flail mower cutting height is adjustable

2. High quality & heavy duty ‘A’ type drive belts

3. 8mm heat treatment Spring Steel blades

4. Sand blasting treatment & ba ept surface treatment

5.15hp Lifan gasoline engine

6.The tyres can be adjusted from both side to back

Model

ANFLM-150

ANFLM-120

Engine 

15hp Lifan gasoline engine,4-stroke,25′ inclined,single cylinder with air-cooled

Number of blades

N: 30  O: 48

N: 24  O: 36

Cutting height

25-70mm

Cutting width

1.4-1.5m

1.1-1.2m

Start up type

Manual / Electric

Working efficiency

2500-6500 m2/h

Weight

300kg

270kg

Packing size(LxWxH)

1750x1000x1000mm

1350x1000x1000mm

Packaing details

Iron frame

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Anon  made in China - replacement parts -   pto reverser gearbox for sale   Buraydah Saudi Arabia   China ATV Front Mounted Flail Mower with ce certificate top quality low price

Anon  made in China - replacement parts -   pto reverser gearbox for sale   Buraydah Saudi Arabia   China ATV Front Mounted Flail Mower with ce certificate top quality low price

Anon  made in China - replacement parts -   pto reverser gearbox for sale   Buraydah Saudi Arabia   China ATV Front Mounted Flail Mower with ce certificate top quality low price

Anon  made in China - replacement parts -   pto reverser gearbox for sale   Buraydah Saudi Arabia   China ATV Front Mounted Flail Mower with ce certificate top quality low price

Ce made in China – replacement parts – tractor pto reverser gearbox for sale Ho Chi Minh City Viet Nam Approved Light Verge Side Flail Mower with ce certificate top quality low price

Ce  made in China - replacement parts -   tractor pto reverser gearbox for sale   Ho Chi Minh City Viet Nam   Approved Light Verge Side Flail Mower  with ce certificate top quality low price

We ensures the stability and consistency of the key function of components.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

CE Approved Light Verge Side Flail Mower (AGDL125)

PRODUCT DETAIL pto driven gearboxes Bandung Indonesia S: 1.Transmission: By sturdy toothed belts.(VB Belt) 2.Graphite gearbox is made of casting iron 3.The suspension plate shape is made by laser cutting,molding location 4.With adjustable rear roller, the mowing height can be adjusted easily 5.Side protection plates are added onto the rear deflection 6.Y shape blades, hammer and straight blades for grass. (Optional for customers.) 7.The blades are under hot dealing and special testing 8.With front protection, to avoid splashing 9. Use powder painting 10.Labels are:water proof, damp proof, mould proof, anti-ultraviolet radiation

 

Guarantee & Warranty: 1.Warranty time:14months,longer than any other Chinese suppliers. 2.With CE CERTIFICATES. 3.All of your ordered machines will be tested to ensure the quality before shipment. 4.We will provide you with the test reports together with the container or sample packages. 5.Even the packages,all of them are guaranteed for customs check or inspections.

flail mower with ce

HangZhou BETTER. AGRO Industry (B.T.A), as one of the leading manufacturers in the production of agricultural equipments, is located in TiHangZhou District, HangZhou, ZheJiang , China, with good location, convenient transportation and complement resources.

B.T.A’s motto is “tending to the details others can ‘t “, and it is committed to creating the top brand in the high-end agricultural machinery. In line with the philosophy of “ta ept the initiative to participate in market competition”, B.T.A spares no effort to design and develop the most professional and the most sophisticated new types of agricultural machinery products.

B.T.A has professional laser cutting machines, fully automatic CNC bending machines, standard welding jigs and automatic spraying production line and other advanced production equipment, as ept as excellent ept research and development team. It strictly follows European & American Design and Use Standard and adopts an advanced management system and strict quality control. It not only gives strict product performance assessment according to the field test specification and passed the CE certification, but also constantly improves and upgrades products after user feedback. B.T.A is ept known with its superior design, rich varieties and reliable quality, it is especially recognized in the United States, Germany, Netherlands, Belgium, Australia and other countries.

B.T.A is mainly engaged in the research and development, manufacturing and sales of various types of agricultural and garden machinery. Our main products are divided into our categories: farm machinery, garden machinery, forestry machinery and road machinery. Some of our ept known products include 3 point linkage rotary tiller, finishing mower, flail mower, verge flail mower, rotary slasher, wood chipper, trailer, spare parts and Japanese tractor accessories, which are exported to over 20 countries.

In the future, B.T.A will further optimize the structure of existing products according to the requirements and characteristics of farmers, satisfy the needs of the ept market and establish the perfect after-sales service system.

 

1.Delivery time:35 wor ept days

2.From confirming the order to shipment,our after-sale service will update the photos to you.

 

Q1. What are your terms of packing?

A: Generally, we pack our goods in bulks or wooden box, suitable for shipping container.

 

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

 

Q3. What are your terms of delivery?

A: EXW, FOB, CFR, CIF.

 

Q4. How about your delivery time?

A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends 

on the items and the quantity of your order. 

 

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings.

 

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock.

 

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

 

Q8: How do you make our business long-term and good relationship?

A1:We keep excellent quality, thoughtful after-sales service and competitive price to ensure our customers’ benefit;

A2:We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Ce  made in China - replacement parts -   tractor pto reverser gearbox for sale   Ho Chi Minh City Viet Nam   Approved Light Verge Side Flail Mower  with ce certificate top quality low price

Ce  made in China - replacement parts -   tractor pto reverser gearbox for sale   Ho Chi Minh City Viet Nam   Approved Light Verge Side Flail Mower  with ce certificate top quality low price

Ce  made in China - replacement parts -   tractor pto reverser gearbox for sale   Ho Chi Minh City Viet Nam   Approved Light Verge Side Flail Mower  with ce certificate top quality low price

Ce  made in China - replacement parts -   tractor pto reverser gearbox for sale   Ho Chi Minh City Viet Nam   Approved Light Verge Side Flail Mower  with ce certificate top quality low price

Cast China 540 to 1000 pto converter gearbox Nantes France Iron Injection Head for Aluminum Die Casting 50 60 with ce certificate top quality low price

Cast  China   540 to 1000 pto converter gearbox   Nantes France   Iron Injection Head for Aluminum Die Casting 50 60 with ce certificate top quality low price

We From the gearboxes of the very first days, built at the beginning of the 1997, to the organizational, technological and processing excellence of a large global enterprise, partner of the world’s leading manufacturers of agricultural equipment, industrial machinery and renewable energy applications.EPG will always adhere to it enterprise spirit of being practical, innovative, efficient and excellent to make the top international transmission drive.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

EPG is specialized in design, manufacturer and sales of agricultural machinery and farm implements, which has an independent import and export rights bush hog squealer gearbox Volgograd Russian Federation . 2. Auger Boxes. Gearboxes especially designed for use on grain augers 3. Slasher / Mower boxes. Gearboxes designed for Rotary Cutters (Slashers / Mowers.) 4. Worm wheel speed reduction boxes. Gearboxes designed to reduce input shaft speed on equipment like conveyors, mixers etc. 5. Speed Multiplier gearboxes. Gearboxes for increasing tractor PTO speed to run equipment like pumps, generators etc. 6. PTO Speed Reducer/Increaser. Specially designed gearbox for reducing 1000 rpm PTO to 540 rpm. Will also increase 540 rpm to 1000 rpm. Maintains original rotation of PTO output.

Die casting machine details display

Company Introduction
  HangZhou XiHu (West Lake) Dis.Hu (West Lake) Dis.a , founded in 1982, is a professional high-tech enterprise engaged in the design, manufacture and sale of cold chamber die casting machines, die casting peripheral equipments, oil field equipments and new energy equipments (natural gas, nitrogen, epthead, casing, raw materials, liquefied petroleum gas, special gas, compressor).

  On November 7, 2017, XiHu (West Lake) Dis.Hu (West Lake) Dis.a won the national high-tech enterprise certificate!

  On June 26, 2019, XiHu (West Lake) Dis.Hu (West Lake) Dis.a was successfully listed in the National Science and ept Innovation Special Edition!

  Longua intelligent die-casting machines are applicable to manufacture of autoMobile: +86~13083988828 13858117778083988828 and motorcycle parts (engine cylinder block, cylinder head, crankcase, hinged door covers, oil pan, gearbox housing, gearbox end cap, dashboard, etc.), electric escalator handrail/steps, industrial/road/railway/air/agricultural machinery, spotligeptshells, building material parts, furniture, aluminum arts, copper arts, magnesium alloy products, non-ferrous metal processed products and other die casting products.

  XiHu (West Lake) Dis.Hu (West Lake) Dis.a die-casting machine and oilfield equipment products are exported to: Brazil, Egypt, South Africa, Vietnam, Pakistan, Bangladesh, Uruguay, India, Russia, kazakhstan, kyrgyzstan, Ukraine,Japan, Ecuador, the United States,South Korea, Algeria, China ZheJiang and other countries and regions.
  XiHu (West Lake) Dis.Hu (West Lake) Dis.a’s quality goal is that “Today’s quality means tomorrow’s market”.

Cooperative R&D Unit

  XiHu (West Lake) Dis.Hu (West Lake) Dis.a intelligent die casting machine is jointly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed with HangZhou institute of material science, Chinese academy of sciences, with automatic system upgrade, one-click operation, no fault, maept die castings more efficient, more precise, more intelligent and more durable.

Our Customers
We warmly welcome friends from all over the ept to visit our factory

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Cast  China   540 to 1000 pto converter gearbox   Nantes France   Iron Injection Head for Aluminum Die Casting 50 60 with ce certificate top quality low price

Cast  China   540 to 1000 pto converter gearbox   Nantes France   Iron Injection Head for Aluminum Die Casting 50 60 with ce certificate top quality low price

XCMG China 1000 pto to 540 gearbox Nay Pyi Taw Myanmar 2018 New 90ton Jib Crane for Sale with ce certificate top quality low price

XCMG  China   1000 pto to 540 gearbox   Nay Pyi Taw Myanmar   2018 New 90ton Jib Crane for Sale  with ce certificate top quality low price

We Director Shen is extremely proud of having taken the company into the top tier of China agri enterprises in this field. They are even more cognisant of their roots, and take huge pleasure in knowing that many of the firm’s earliest customers – or their families – are still dealing with them today. We give a personal pledge that we will treat even the smallest of orders with the same urgency we offer our corporate clients.If you need any information or samples, please contact us and you will have our soon reply.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

EPG is specialized in design, manufacturer and sales of agricultural machinery and farm implements, which has an independent import and export rights. Our products are of world class quality and extensively demanded all across the world due to their various uses in suitable applications. EPG Do business of approx 40M EURO per year by providing huge range of products to clients at reasonable prices. In addition to this, we export our products by the mode of transportation like road, sea and air. Our company will offer you the high quality products with a low price, quick delivery, and professional after-sale service.
XCMG 2018 NEW 90ton Jib Crane for Sale(XCT90)

Technical Specifications
XCT90 Truck crane is designed to mainly aim at domestic market, and to take ept market requirements into consideration. It is mounted on a self-made special chassis,  which is suitable for driving on a wide range of roads. It has high lifting height, powerful lifting capacity   and   high   worept   efficiency.   It  iswidely used for the lifting operations in general engineering projects, such as ept site, urban renewal, communication and transportation, ports, bridge, oilfields and mine, and complex worept environments.
XCT90 truck crane is mounted on a four-axle truck crane chassis, which has an all-wheel steering system and China V engine. Six-section boom with oval cross-section, new single-cylinder pinning telescoping system, two-section lattice jib, built-in double independent winches, low speed large torque power system, combined counterweight, K-type outriggers and new energy-saving hydraulic system are available. Jib inserts and independent jib head are optional. Intelligent crane boom ept contributes to safety and reliable operation. Newly designed appearance and man-machine interactive system are designed to meet personalized demands from users. Its performance takes the lead in the industry. It is ept, more reliable and energy-saving to operate.

Category Item Unit Parameter
 
 
 
 
Dimension
Overall length mm 13985
Overall width mm 2780
Overall height mm 3990
Wheel base mm 2000+4000+1500
Track mm 2354×2354/2291×2291
Front overhang mm 2525
Rear overhang mm 2310
 
 
 
Weight
Total mass in travel configuration kg 48000
 
 
Axle load
Axle 1 kg 12000
Axle 2 kg 12000
Axle 3 kg 12000
Axle 4 kg 12000
 
 
Power
Chassis engine model   MC11.40-50 WP12.375E50
Engine rated power kW/(r/min) 297/1900 276/1900
 
Engine rated torque
 
N.m/(r/min)
 
1900/1000~1400
 
1800/1000~1400
 
 
 
 
 
 
 
 
Travel
Travel speed Max. travel speed km/h 90
Min. travel speed km/h 1.7~3
 
Turning diameter
Min. turning diameter m 20
Min. turning diameter at boom tip  
m
 
25.2
Min. ground clearance mm 367
Approach angle ° 21
Departure angle ° 15
Braept distance (at 30 km/h ) m ≤10
Max. grade ability % 45
Fuel consumption per 100 km L 45

Company profile
XCMG is a ept machinery manufacturer with over 70 years of experience. Over the years, we have grown to become the ept’s most comprehensive ept machinery manufacturer and influential multinational company. In 2015, we rank No.1 in China and No. 5 in global heavy equipment industry.XCMG’s ept machinery covers an astonishing range of equipment, pto reduction gearbox Sacramento United States incXiHu (West Lake) Dis.Hu (West Lake) Dis. cranes, earth-moving  machinery, road machinery, excavators, concrete machinery, ept machinery, piling machinery, lumber machinery, fire-fighting machinery, heavy trucks, sanitation machinery, agricultural machinery, and more. We have the ept’s most comprehensive product line, and offer customers complete solutions for ept equipment.  Our other businesses include finance, leasing, and remanufacturing.

At present, the power of my company’s straight-arm crane is entirely from the hydraulic oil pressure, that is, through the high-pressure hydraulic oil to promote the cylinder piston reciprocating motion, or drive the hydraulic motor rotation makes the hydraulic winch and rotary mechanism rotation.
 
So, how do high-pressure hydraulic oil get? Each truck crane is equipped with a hydraulic pump when the vehicle chassis is matched, and the engine provides power for it. The chemical energy of the fuel can be converted into the crankshaft of the engine to rotate the mechanical energy, and then the gearbox gear is rotated, and then the power is transmitted to the hydraulic pump through the power transmission of the gearbox. Therefore, the hydraulic pump can continuously pressurize the hydraulic oil For the high-pressure hydraulic oil, so as to provide power for the crane to achieve the lifting of the goods.
 
Competitive Advantage
My company’s straigeptarm crane crane covers 1-25 tons 14 models 65 kinds of products, to meet a variety of conditions, with the longest arm of the largest tonnage crane mature manufacturing ept, scientific research and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment process, advanced Research and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment ept, and constantly have new products to market, to meet customer use.
My company’s boom arm section with mature pentagonal, hexagonal and octagonal, the latest generation of products with U-shaped arc arm body weigeptreduction, arm width of a large deflection, stability and resistance to deformation Ability to improve, significantly enhance the lifting capacity.
The application of the sub-arm, sub-winch and vice-hook provides a basis for the rapid and large-scale operation of the crane ligeptload and the high-altitude operation. The application of automatic hook ept saves time and effort when starting and ending crane operations, maept it easy to operate easily.
Our company will offer you the high quality products with a low price, quick delivery,and professional after-sale service.
FAQ 
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 daeptafter receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 worept hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs    

Contact us

Mr Fang    187 9621 1467 
Mr Ding    138 5200 7271
Mr zou     152 6202 3988 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

XCMG  China   1000 pto to 540 gearbox   Nay Pyi Taw Myanmar   2018 New 90ton Jib Crane for Sale  with ce certificate top quality low price

XCMG  China   1000 pto to 540 gearbox   Nay Pyi Taw Myanmar   2018 New 90ton Jib Crane for Sale  with ce certificate top quality low price

4lz-4.5 China pto step up gearbox Ouagadougou Burkina Faso Combine Harvester for Wheat Rice Soybean Corn Harvest with ce certificate top quality low price

4lz-4.5  China   pto step up gearbox   Ouagadougou Burkina Faso   Combine Harvester for Wheat   Rice   Soybean   Corn Harvest with ce certificate top quality low price

We in India (Bangalore).If you need any information or samples, please contact us and you will have our soon reply.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Our factory has obtained the certificate of China’s Farm Machinery Products Quality Authentication promulgated by the Farm Machinery Products Quality Authentication Centre of China. We “EPG” are a leading manufacturer of a commendable and high quality range of agri-machine parts, Agriculture Gearbox, Thresher Machine Head. Established in the year 1997, we are a Sole Proprie pto gearbox manufacturers Dortmund Germany torship company that is situated at HangZhou China and actively committed towards manufacturing the best class products in various specifications and with assured quality. Under the supervision of our mentor “Alan Schen”, we have been able to accomplish the diverse requests and demands of our customers.

4LZ-4.5 Combine Harvester
For Wheat / Rice / Soybean / Corn Harvest

 

Welcome !

 

Product Parameters

No. Item Unit Upgraded 4LZ-4.5 Specification 
1 Model   / 4LZ-4.5
2 Sturcture Type    / Vertical AXiHu (West Lake) Dis.s Flow Full Feeding Rubber Crawler Self-propelled
3 Engine Type / 4-Cylinder,Vertical Engine,Water Cooled, 
DI-Injection, Turbocharged Engine
Rated Power kW 65
Rotating Speed r/min 2400
4 Dimension(L*W*H): Worept State mm 4850*3200*2500
Transportation mm 4850*2735*2500
5 Weight   kg 3000
6 Cutting Width   mm 2180
7 Feeding Capacity   kg/s 4.5
8 Minimum Ground Clearance   mm 310
9 Operation Speed   km/h 1.8 to 5.3
10 Productivity   hm2/h 0.25 to 0.65
11 Fuel Consumption   kg/hm2 18.5 to 40
12 Cutter Type   / StHangZhourd Type II
13 Cutting Header Auger Type   / Mobile: +86-13083988828escopic Transverse Conveyor Auger
14 Reel Type / Eccentric Tooth(off center)
Diameter mm ∮1000
Quantity pc 5
15 Threshing Roller Quantity pc 1
Type / Vertical AXiHu (West Lake) Dis.s Flow Spike Tooth
External(D*L) mm ∮655*1877
16 Concave Sieve Type   / Grid
17 Brake Type   / Wet Friction Plate
18 Fan Type / Centrifugal
Diameter mm ∮346
Quantity pc 1
19 Rubber Crawler Size / 450mm*90mm*56
Track Gauge mm 1190
20 Gear Box   / Hydraulic Stepless Speed Transmission(HST)
21 Rethresher Type   / Auger Spike Tooth 
22 Grain Unloading Type   / Hydraulic Rate

 

Product Details

 
Our Factory

Our Advantages

 

Packaging & Shipping

 

FAQ:

 

1. Q: What is the warranty of your agricultural machines?

   A: 1 year guarantee for whole machine ( except quick-wear parts ), engine and gear box.

 

2. Q: Are there any optional parts for your combine harvesters ?

   A: Yes, optional parts such as rubber track size, grain tank and type of grain unloading.

 

3. Q: How long is your delivery time ?

   A: Normally it takes 15-20 daeptto deliver after your deposit receipt or L/C at sight.

 

4. Q: How many harvesters can be loaded in one container ?

   A:  (1) 20 Feet Container loads:

 

For combine harvester:

 

1 set 4LZ-4.0/4.5

For Power Tiller: 18 sets GN12; 20 sets M80

For Spare Parts: 15-18 tons

 

(2) 40 High Cube Container Loads:

 

For Combine Harvester:

3 sets 4LZ-4.0/4.5

For Power Tiller: 40 sets GN12; 50 sets M80

For Spare Parts: 30-35 tons

 

5. Q: What is the payment term ?

   A: Irrevocable L/C at sigeptor 30% T/T in advance and balance against B/L copy.

 

6. Q: What is the after-sales service ?

   A: Every year we send our engineer and after-service people to local market to assist our sales agent for staff training, marketing, advertising, mainXiHu (West Lake) Dis.Hu (West Lake) Dis. and repairing the machine during the harvesting sept.

 

7. Q: Is OEM or ODM service acceptable ?

   A: OEM service is no problem, if you have any special requirements about the machines, please kindly inform us, our engineering department will study and offer you the suitable solution.

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

4lz-4.5  China   pto step up gearbox   Ouagadougou Burkina Faso   Combine Harvester for Wheat   Rice   Soybean   Corn Harvest with ce certificate top quality low price

4lz-4.5  China   pto step up gearbox   Ouagadougou Burkina Faso   Combine Harvester for Wheat   Rice   Soybean   Corn Harvest with ce certificate top quality low price